tests/21-12-27_borresen
 
Test.
Deutsch English|

Børresen Acoustics 05 Silver Supreme Edition

27.01.2022 // Dirk Sommer

The Børresen 05 SSE is a two-and-a-half-way loudspeaker about 1.55 meters tall with a vented enclosure, whose three openings in order to ensure a noiseless air flow are each fitted with a metal diffuser, which is so characteristic for the appearance of the Danish loudspeakers. The upper end of the frequency band, as in all models of the 0-series, is in charge of the proprietarily manufactured planar ribbon tweeter - as known from the 01 - with an efficiency of 94 decibels, which can be used from about 2.5 kilohertz upwards and does without a transformer. The moving mass of the Børresen tweeter is said to be only 0.01 grams. As good as the ribbon tweeter may be, what lets the speakers in Børresen's 0-series set out of the crowd are the bass/midrange drivers with their patented, completely iron-free motors. Thanks to four opposing neodymium-52 ring magnets and rings of pure copper in between, or pure silver in the case of the Silver Supreme Edition, Michael Børresen was able to reduce the inductance of the voice coil to less than 0.04 millihenry - not even a tenth of the value of conventional drivers. This is intended to benefit the excursion speed of the driver as well as its ability to reproduce detail and to ensure that it is an extremely easy load for the amplifier to drive, with only minor impedance fluctuation and phase rotation.

The housing behind the ribbon tweeter is vented. The aluminum application is a kind of trademark of the 0-series
The housing behind the ribbon tweeter is vented. The aluminum application is a kind of trademark of the 0-series

The 05 uses two bass/midrange drivers with a cone diameter of 11.5 centimeters and four bass/midrange equivalents with a diameter of 15.5 centimeters. The diaphragms consist of two layers of very thin carbon on either side of a four-millimeter-thick Nomex honeycomb core and feature a very good stiffness-to-weight ratio. The pure silver rings of the six drivers together weigh about three kilograms. All Børresen speakers are conceived as two- or two-and-a-half-way designs. Michael Børresen has, of course, had experience with prototypes with more ways. But, only with the restriction to a maximum of two and a half ways he could - as he revealed in the interview - achieve the desired seamless and completely homogeneous performance. The serial crossover, thanks to which the electric current is supposed to be phase-locked over the crossover’s entire frequency range, certainly plays its role in this. Vacuum-impregnated coils are also being used in the 05. Here, however, the arrays of small, military-spec foil capacitors are biased. The speakers therefore come with the appropriate power supplies, but they are only the baseline to start from.

The bass/midrange driver with a cone diameter of 11.5 centimeters is used in all models of the 0 series
The bass/midrange driver with a cone diameter of 11.5 centimeters is used in all models of the 0 series

Weeks before the two huge flight cases with the 05 SSE speakers arrived in Gröbenzell, Morton Thyrrested, who, among other things, is the sales representative for the German-speaking countries, had put a PowerBox D-TC SUPREME and a Mainz D2 on their way: Ansuz' best external power supply, which provides the 14 volts needed by the 05, and the third best model in their row of current power cables. Also included were Speakz D-TC SUPREME speaker cables, as all the cables commonly used in my listening room are terminated with spades. Børresen speakers are basically fitted with jacks for banana plugs only, since the Danes consider these to be by far the best connection variant available. Of course, Morton Thyrrested, who also operates an 05 SSE at home and had raved to me about its capabilities especially in combination with the coupling elements from Zikonium, the Darks Z2S, had also thought of supplying two corresponding sets of feet. The fact that the "accessories" mentioned above push the price of the test objects distinctly upwards, should only be mentioned in passing...


  • Keces Ephono+

    Nein, ich werde mich ab sofort nicht mehr nur mit günstigen Hifi-Komponenten beschäftigen, auch wenn durch den Test des erschwinglichen Eversolo DAC-Z10 und des Ephono+ der Eindruck entstehen konnte. Denn obwohl Keces der Signalverarbeitung und dem Netzteil je ein eigenes Gehäuse spendiert, ist die Phonostufe für gerade einmal 1.200 Euro zu haben. Ich habe zwar gegenüber Komponenten mit moderaten Preisen genau so wenig Berührungsängste wie gegenüber solchen mit exorbitant hohen – wie sich Anfang des…
    23.12.2025
  • Galion Audio Navy Röhrenvorverstärker

    Wir haben das röhrenbestückte Vorverstärker-Flaggschiff Navy des jungen kanadischen HiFi-Unternehmens Galion Audio unter die Lupe genommen. Der Line-Vorverstärker mit vier Doppeltrioden 12AT7 (ECC81) wartet nicht nur mit hochwertigen Bauteilen auf, sondern er ist das spannende Designprodukt eines high-fidelen Überzeugungstäters. Mir sagte der Markenname Galion Audio bislang wirklich gar nichts. Das junge Unternehmen aus Québec in Kanada wurde 2020 von Thomas Tan, einem passionierten Audiophilen, YouTuber („Thomas & Stereo“) und Content Creator, gegründet. Ziel war, seine…
    16.12.2025
  • Eversolo DAC-Z10

    Meine beiden D/A-Wandler, der DAVE im Arbeits- und der HUGO TT2 im Wohnzimmer, werden serienmäßig von Schaltnetzteilen gespeist. Bei letzterem kommt seit einiger Zeit ein Ferrum Hypsos, bei Chord Electronics Topmodell ein lineares Dreifach-Netzteil zum Einsatz. Ein solches versorgt auch den Eversolo DAC-Z10 – zum Preis von 2.000 Euro. Und nein, es sind keine drei ausgelagerten Stromversorgungen, für die der genannte Preis gilt. Dafür bekommt man das vollständige Topmodell unter Eversolos DACs. Es ist schon…
    09.12.2025
  • Raidho X2.6 Standlautsprecher

    Mit Lautsprechern von Raidho haben wir uns bei Hifistatement schon öfter beschäftigt. Im Fokus standen dabei die Kompaktlautsprecher TD1.2 aus der TD-Serie sowie X1t und X1.6. aus der X-Serie. Diesmal haben wir den Standlautsprecher X2.6 zu Gast, das aktuell größte Modell der X-Serie. Raidho verspricht, mit der X-Serie besonders viel Leistung – sprich Klangqualität – für den aufgerufenen Preis zu bieten. Wobei, „billige“ Lautsprecher – ganz gleich nach welchem Maßstab - hat Raidho noch nie…
    02.12.2025
  • Canor Virtus A3

    Zur diesjährigen HighEnd stellte Canor den Virtus A3 Hybrid-Vollverstärker vor. Der lockt mit einem integrierten Digital-Analog-Wandler und einer diskret aufgebauten Phono-Vorstufe für MM- und MC-Tonabnehmer. Sowohl seine Technik als auch die Ausstattung bieten Ungewöhnliches. Vor allem aber soll er klanglich beeindrucken. Das slowakische Entwickler-Team konnte mich bereits vor einem Jahr überzeugen: Der Vollverstärker Virtus I2 aus der Premium Line musizierte in meinem Hörraum wie keiner zuvor in dieser Preisklasse. Der war ein gestandener Röhren-Vollverstärker. Auch…
    28.11.2025
  • Dan D’Agostino Progression S350

    Dan D’Agostino ist eine Legende im Verstärkerbau. Er folgte wohl nie einer Mode, sondern vertraut bei allen Entwicklungen seinem Gehör und seiner Leidenschaft für den guten Klang. Mehr als 50 Jahre baut er nun schon Verstärker, immer mit dem Ziel, das „Wesen der Musik hörbar zu machen“. Erfüllt auch der S350 diese hoch gesteckten Ambitionen? Die Progression S350 ist die kleinste Stereoendstufe im Gesamtprogramm. Optisch trägt sie alle charakteristischen Merkmale einer echten D’Agostino. Angefangen mit…
    25.11.2025

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.