tests/25-01-28_goebel
 
Test.
Deutsch English|

Göbel High End Divin Comtesse

20.02.2025 // Dirk Sommer

The woofer operates on symmetrical bass-reflex ports, shown here in the picture is the one above the driver, whereas the compartment of the midrange driver is closed
The woofer operates on symmetrical bass-reflex ports, shown here in the picture is the one above the driver, whereas the compartment of the midrange driver is closed

Since the Comtesse didn’t take very long to make a lasting impression on me, either when it came to joyful listening or when taking the gloves off with the relevant test tracks, I really wanted to offer them better acoustical conditions. As I noticed after moving my Goebel Epoque Aeon Fine from the study to the living room, latter makes it much easier for speakers to perform, especially in the lows: There is neither a gap in the low frequencies nor do room modes disturb the bass range. Since the left speaker is closer to the sloping ceiling than the right one, the balance shifts a bit to the left, especially with tall speakers like the Acapella Violon VI – an effect that was, however, less pronounced with the less tall Epoque Aeon Fine. That's why I suggested to Oliver Goebel that he should set up the Comtesse in the living room. He didn't think twice and agreed without hesitation. It, however, then took much longer to persuade the perfectionist to get the Divin moved out of the study. Although I had already dismissed the issue of the listening room, he insisted on spending over an hour there experimenting with the placement of the Comtesse to minimize the effect of the low-frequency dip. He succeeded in doing so by placing the listening chairs very close to the back wall, but in my opinion this lead to a negative effect on the sense of space.

The waveguide of the Air Motion Transformer is milled out of a solid block of aluminum
The waveguide of the Air Motion Transformer is milled out of a solid block of aluminum

Perhaps I should add that moving to the living room should not be considered as an audiophile descent, as the system there has improved significantly in recent years: Einstein's The Preamp and The Poweramp are in charge of amplification here. They are connected with a balanced Swiss Cable Reference Plus, while an Audioquest Dragon Bi-Wire connects the power amplifier and the loudspeakers. The room is connected to the network via Media Converters fed by linear power supplies and a single-mode Duplex optical fibre cable. Digital signals are processed by Chord Electronics' M-Scaler and converted by a Hugo TT 2. Usually, a 2GO and a 2YU – originating from Chord Electronics as well – serve as network transport. But I didn't want to impose these little boxes on Oliver Goebel and the Comtesse. Since I made best experiences with the Lumin U2, I asked Krey Baumgartl for an exciting alternative. He suggested the brand-new T3X, which I could use as a network transport before it would move to a colleague for testing afterwards.

The Comtesse is conceived for bi-wiring using WBT terminals
The Comtesse is conceived for bi-wiring using WBT terminals


  • Unison Research Simply Italy Black Edition

    Unison Research feiert sich und seine erfolgreichsten Produkte selbst: Der Verstärkerklassiker Simply Italy kommt als Black Edition mit veränderten technischen Details und frischer Optik daher. Wir hinterfragen, ob es sich nur um pures Marketing oder tatsächlich um Neuerungen mit klanglich relevanten Verbesserungen handelt. Der Look der Black Edition zeichnet sich durch eine hochglanzlackierte Frontplatte, dunkel eloxierte Metalloberflächen und ein neues grafisches Design mit geänderter Typographie aus, ganz im Gegensatz zu den nach meinem Empfinden bisweilen…
    25.04.2025
  • Melco S1 und C1-D20 SFP+ Direct Attach Network Cable

    Während der letzten High End plante Melco, das LAN-Switch S1 noch Ende des Jahres auszuliefern. Nun dauerte es mit der Fertigstellung ein wenig länger, einerseits mit der des Produkts, andererseits mit der dieses Berichts. Ich wartete vergeblich auf technische Erklärungen, nutzte die Zeit aber, um die zahlreichen Möglichkeiten des S1 auszuprobieren. Ich kann mich beim besten Willen nicht daran erinnern, zuvor ein derart reichhaltig ausgestattetes Switch gesehen zu haben: Neben den sieben RJ45-Anschlüssen für Ethernet-Kabel…
    22.04.2025
  • Taiko Audio Olympus XDMI + I/O XDMI

    TAIKO AUDIO wurde von Emile Bok gegründet, der im Alter von zwölf Jahren seinen ersten Lautsprecher baute. Im Jahr 2008 entwarf und produzierte er seine ersten Audioprodukte. Heute bietet das Unternehmen vor allem einen Audio File Server/Transport namens Olympus an, eines der fortschrittlichsten und teuersten Produkte seiner Art. Einem Unternehmen einen Namen aus einer Fremdsprache zu geben, ist etwas völlig Natürliches. In Polen ist es fast ausnahmslos Englisch: Orange, 11 Bit Studios, Arctic Paper. Wenn…
    18.04.2025
  • Senna Sound Orca und Onyx

    Der serbische Hersteller Senna Sound ist neu am Markt, hat aber eine sehr nahe, ja ursprüngliche Beziehung zu dem Röhrenverstärker-Spezialisten Trafomatic Audio. Von den drei Senna-Sound-Erstlingen stehen hier der Vorverstärker Orca und die Endstufe Onyx zum Test. Das dritte Gerät wäre der Phono-Vorverstärker Phönix. Diesen bietet der deutsche Importeur Audio Offensive für 2150 Euro an. Vor- und Endstufe Orca und Onyx kosten zusammen 5850 Euro. Aus mindestens zwei Gründen sind sie optisch ungewöhnlich. Ihre kleinen…
    15.04.2025
  • Cayin Jazz 100

    Mit dem Jazz 100 bringt Cayin einen puristischen Röhrenvollverstärker in Class-A Schaltung auf den Markt, dessen direkt geheizte Single-Ended-Triode 805A feiste 35 Watt Ausgangsleistung an die Lautsprecherklemmen bringt. Nicht nur das Interesse von Klanggourmets mit erhöhtem Leistungsbedarf ist geweckt, sondern vor allem meins! Als bekennender Fan der Marke Cayin war die Vorfreude nach der Ankündigung groß, den Jazz 100 für einen Test zur Verfügung gestellt zu bekommen. Zwar gaben auch schon etliche andere Geräte des…
    11.04.2025
  • XACT PhantomTM USB und LAN

    Netzwerk- und Streaming-Spezialist Marcin Ostapowicz baut sein Angebot immer weiter aus: Es begann mit Upgrade-Baugruppen für audiophil verwendete Computer und den entsprechenden Kabeln von JCAT und der JPLAY-App. Unter dem Markennamen XACT gibt es inzwischen zwei Server, Gerätefüße und nun auch zwei High-End-Datenleitungen: PhantomTM USB und LAN. Bisher wurden Kabel ausschließlich unter dem Label JCAT angeboten. Mit dem USB- und dem Reference LAN-Kabel beschäftigte sich Roland Dietl schon vor rund neun Jahren und war davon…
    04.04.2025

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.