tests/21-09-03_audioquest
 
Test.
Deutsch English|

Audioquest Jitterbug FMJ

11.11.2021 // Dirk Sommer

Jitterbugs have been permanent fixtures in my chain for almost six years. One sits between the Auralic Aries Femto and the Mytek Manhattan II, the other on a USB input of the Apple TimeMachine. In the meantime, Audioquest has reissued its successful model and equipped it with a metal housing: The Jitterbug Full Metal Jacket, or FMJ for short.

Since in the meantime, the TimeMachine no longer acts as a router but only serves as a backup, and it is isolated from the system via fiber optics and ADOT media converters just like the current router, I should perhaps check whether the Jitterbug still has any effect at this point. However, I wouldn't want to do without the one between the Aries and Manhattan by any means, even though the Aries must output a pretty clean signal, as experimenting with a Mutec Reclocker at this point has shown: At this point, the Mutec did not deliver any clear improvements. One could benevolently say that it made for an even calmer sound, but Roland Dietl and I agreed at the time that, used after the Aries, it made the reproduction seem tedious and unexciting. A Jitterbug, on the other hand, did what it almost always does at this point: it made the imaginary stage appear even more extensive, improved audibility, and presented dynamic contrasts even more impressively. And if I ever need music data directly from the MacBook's USB port for tests, a third Jitterbug is always part of the package.

One of the innovations in the Jitterbug FMJ is the cap, which is connected to the housing and interwoven with carbon fibers for RF shielding
One of the innovations in the Jitterbug FMJ is the cap, which is connected to the housing and interwoven with carbon fibers for RF shielding

But now to the new FMJ: Besides the material of the case, the closure of the rear USB socket has also been changed. It is now connected to the case, and carbon fibers are incorporated into the rubber to absorb high-frequency radiation. In the product information, Audioquest also mentions a "discrete dual circuit for noise dissipation" but does not state whether this was also found in the old Jitterbug and how it works exactly. The only way to get more insight into the Jitterbug FMJ is to try it out. While its developers recommend using it in conjunction with the DragonFly Black and Red, they do not make a clear recommendation for use with the Cobalt, which also contains parts of the filters used in the Jitterbug.

The Jitterbug FMJ with opened cap
The Jitterbug FMJ with opened cap

For a first encounter, I try out the Cobalt with the old and new Jitterbug. That is with Shostakovich's Symphony No.15 from an external USB hard drive. Audirvana acts as a audio player. Even in combination with the DragonFly Cobalt, the Jitterbug brings clear sonic advantages: You get a more realistic idea of the recording room. Even though I can't experience a depth gradation via headphones - in this case, the Sendy Audio Aiva - the individual instrument groups are now more clearly separated from each other, also spatially. The timbres are warmer, and the high frequencies do not even have a hint of roughness anymore. The reproduction also shows a bit more dynamics now. But you and I already knew that the Jitterbug almost always has a beneficial effect. So, I listen to the first movement of the symphony again with the Jitterbug FMJ. To say it right away, the differences here are not massive. When switching to the new model, the first thing you notice is that the music now flows a bit smoother. The piece also seems a bit more rhythmically exciting – an impression reinforced when the original model is inserted again between the MacBook and the DragonFly. As so often, the change for the better seems less spectacular, but the way back makes the previously achieved improvement ear-catching.


  • Storgaard & Vestskov Frida

    Frida von Storgaard & Vestskov hat mich bereits auf den Hamburger HiFi-Tagen 2024 derart verblüfft, dass ich lange im Raum der Dänen verweilte und der Vorführung gespannt zuhörte, strafte der Lautsprecher seine physische Größe offensichtlich Lügen. Nun hat diese Pretiose endlich den Weg von Bornholm zu mir nach Hause gefunden. Für alte HiFi-Hasen wie mich werden lichte Momente auf Messen und Ausstellungen zunehmend seltener, damit spiele ich nicht auf meinen verblassenden persönlichen Geisteszustand an, sondern…
    26.08.2025
  • Finite Elemente Carbofibre° Statement

    On a trip to the West German Ruhr region, I stopped off in Meschede, where Finite Elemente is located. Luis Fernandes and Werner Moehring presented the new Pagode Signature MKII entry-level series, Carbofibre° shelves for optimizing the sound of USM Haller furniture, and an ultimate component platform called Statement. The acoustic characteristics of my listening room were discussed here not too long ago, but without very much going into detail about the tiled floor, which…
    22.08.2025
  • Eversolo DMP-A10

    Dieser Test hatte eine lange Vorlaufzeit, war jedoch nicht von langer Hand geplant. Ich hatte mir den Eversolo DMP-A10 ausgeliehen, da man mit ihm zwei Festplatten direkt vergleichen kann, wobei es aber allein um die kältebehandelten SSDs ging. Dann weckte das enorm günstige Preis/Klangverhältnis des Luxsin X9 aus demselben Konzern mein Interesse. Als ich plante, eine ganz normale, eine mit Musik bespielte und dann kryogen behandelte sowie eine tiefgefrorene und daraufhin mit Daten bespielte SSDs…
    19.08.2025
  • ramar Schallplattenbürste & Resonanzkontrollkonzept JEWEL

    ramar aus Berlin bringt frischen Wind in die Welt des High-End-Zubehörs: kompromisslos gestaltet, funktional durchdacht – eine Entdeckung, die audiophiles Zubehör zu einem echten Erlebnis werden lässt. Manchmal beginnt eine Geschichte aus einer Kombination von Leidenschaft und Frust – so auch im Fall von Rangel Vasev, dem Gründer und Kopf von ramar. Auf der Suche nach einer Plattenbürste fand er nichts, was sowohl qualitativ als auch optisch seine Erwartungen erfüllte. Auch der Besuch von Messen…
    15.08.2025
  • Luxsin X9

    Die intensive Bemühung um besten Klang aus digitalen Wiedergabeketten und die Beschäftigung mit Servern, DACs, Switches, Kabeln und Filtern haben ihre Spuren hinterlassen: Vor Jahren hätte ich eine Kopfhörerverstärker/DAC-Kombination wie den X9, der eingespeiste analoge Signale digitalisiert, einem Kollegen zugeschanzt. Jetzt finde ich ihn spannend. Dafür gibt es nicht nur einen Grund: Zum einen haben die inzwischen ausgesprochen positiven Erfahrungen mit digitalen Quellen – wie oben angedeutet – die alten Ressentiments eines Analogfans fast gänzlich…
    12.08.2025
  • The Chord Company PhonoARAY

    Beim Test der GroundARAYs der Chord Company fand ich es recht unerfreulich, dass keine genauen Informationen zur Funktionsweise dieser Art von Abschlusssteckern für freie Ein- und Ausgänge zu bekommen waren. Klanglich überzeugten sie mich aber derart, dass ich einige davon für die Kette im Wohnzimmer erstand. Nun präsentiert Chord das PhonoARAY. Auch wenn der Name es nicht auf der ersten Blick erkennen lässt, geht es beim PhonoARAY wirklich um den Ground, also die Erdung des…
    08.08.2025

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.