tests/20-03-10_soundspace
 
Test.
Deutsch English|

Soundspace Systems Pirol

22.05.2020 // Dirk Sommer

The rear side of the Pirol showing the active bass module: The bass level can be adjusted via the rotary knob at the bottom left. The ribbed knob further up determines to which extent the rear-radiating ribbon tweeter interferes with the sound
The rear side of the Pirol showing the active bass module: The bass level can be adjusted via the rotary knob at the bottom left. The ribbed knob further up determines to which extent the rear-radiating ribbon tweeter interferes with the sound

After the Pirol had made its very first, very positive impression, we got a start on the fine tuning. As already mentioned, there wasn’t any need to worry about tonality and dynamics. However, as the Kawero Classic and the Goebel entry-level model Epoque Aeon Fine had previously indulged me with a much deeper soundstage, I asked Michael Plessmann to tease somewhat more out of his creations in this regard. Giving the speakers a more precise alignment, he was able to achieve marginal improvements. But, however, after connecting his laptop to the active electronics of the two speakers one by one and shifting the frequency at which the first-order filter stepped in from a surprisingly low 50 hertz to an even more surprising 27 hertz, the sound immediately isolated itself entirely from the cabinets and the imaginary soundstage enlarged a good deal further into the deep. This would have left me happy all around – if the DSPs would have been capable of saving these settings. But to achieve this, Michael Plessmann had to first commission a software update from his German DSP supplier.

The internal cabling is individually hand-tailored by Soundspace Systems to the connected drivers and fixed with cable ducts made of (resonant) wood
The internal cabling is individually hand-tailored by Soundspace Systems to the connected drivers and fixed with cable ducts made of (resonant) wood

While waiting for the update to arrive, I had enough time to gain initial experience with the Pirol. As long as a loudspeaker isn’t as demanding on power amplifiers as the "previous", somewhat amplifier-killing Goebel Epoque Fine, I am not necessarily interested in the efficiency of a transducer. Be that as it may, the representatives from Soundspace Systems made it obvious that after all I ought to somehow think about it: Even when listening to the most familiar records, there suddenly was fine detail to be more clearly audible than with transducers whose efficiency lies around 90 decibels. Although this will not have the effect of me ordering the one or other low power amplifier for reviewing right away, it makes me better understand the preferences of my colleagues Saile and Bussler. Efficiency is something that's not to be sneezed at – even when the power amps in play then have power in abundance. Actually, I could get used to the active bass of the Pirol in the long run. Even if the bass level is clearly set to joyful listening, the lows of the Pirol remain rhythmically thrilling, resilient, nimble, fast and outlined. And such a constellation is a very difficult thing to achieve with pure passive concepts. One usually has to decide between the earmarks just described or immersing in pleasant low bass waves.

Midwoofer and tweeter were positioned as close to each other as possible to allow for rather small listening distances
Midwoofer and tweeter were positioned as close to each other as possible to allow for rather small listening distances


  • Aavik Acoustics R-588

    Keces' Vorverstärker S4 war der erste Anlass, mich mit einem DS-Audio-Tonabnehmer zu beschäftigen. Für den Erwerb eines W3 sprachen dann meine sehr positiven klanglichen Erfahrungen damit, aber auch die Tatsache, dass immer mehr hoch interessante Phonostufen einen dafür geeigneten Eingang aufweisen würden. Eine davon ist die Aavik R-588. Schon vor meinem Entschluss, meinen Tonabnehmerfundus um ein photoelektrisches Exemplar zu erweitern, hatten beispielsweise Kato san, Angus Leung und Michael Børresen angekündigt, dass in den in Entwicklung…
    26.06.2026
  • Qln Prestige Three Gen 2

    Mit Lautsprechern der schwedischen Marke Qln haben wir uns bei Hifistatement bisher noch nicht beschäftigt. Ein Versäumnis – wie sich gleich zeigen wird. Also kommen wir schleunigst zum Test der brandneuen QLN Prestige Three Gen 2, einem eleganten Standlautsprecher in klassischer Zwei-Wege-Bestückung mit ambitioniertem Anspruch. Die Ursprünge von Qln reichen bis ins Jahr 1977 zurück. Die fundamentale Zielsetzung der damaligen Gründer ist von Beginn an audiophiler Natur, nämlich einen Lautsprecher zu entwickeln, der die Klangbühne…
    23.06.2026
  • Vertere Ruby one

    Die Beschäftigung mit dem Vertere Xtrax vor beinahe anderthalb Jahren hatte richtig Spaß gemacht. Daher nahm ich das Angebot von Andreas Kayser, dem Inhaber des deutschen Vertere-Vertriebs Beat Audio, das neue Topmodell Ruby one zu testen, gerne an. Dafür habe ich sogar eine meiner selbstauferlegten Regeln für Tests gebrochen. Dazu später mehr. Vorrangig freute ich mich darauf, nach Monaten endlich mal wieder längere Zeit nur Schallplatten zu hören. Außerdem unterscheiden sich Xtrax und Ruby one…
    19.06.2026
  • Canor Foundation Line Virtus I4S und Verto D4S

    Die neue Vollverstärker und Digital/Analog-Wandler der Canor Foundation Line erfreuen nicht allein wegen ihrer eleganten Optik, sondern auch dank ihrer Preise. Die kostspieligeren Komponenten aus dem Hause Canor verwöhnten stets mit beeindruckender Musikalität und waren daran gemessen preiswert. Profitiert die Foundation Line von deren Genen? Auf der Canor Website findet man in der Beschreibung des Virtus-I4S-Vollverstärkers gleich als Überschrift den Hinweis, dass mit „modernsten, teilweise aus der Referenzserie adaptierten Technologien und Konzepten für ein überzeugendes…
    16.06.2026
  • Spendor A1.2

    Spendor hat seinen Klassiker A1 verfeinert. Der wichtigste technische Unterschied ist eine zusätzliche Verstrebung, die jetzt direkt hinter dem Tiefmitteltöner sitzt und über eine Sorbothane-Dämpfung mechanisch gekoppelt ist. Dadurch sollen störende Resonanzen reduziert werden. Wir haben uns die Evolutionsstufe A1.2 angehört. Einleitend möchte ich kurz auf meine persönliche Perspektive zu diesem Lautsprecher eingehen. Denn was um Himmels Willen interessiert einen Hochwirkungsgrad-Junkie eine kleine Regalbox mit bescheidenem Wirkungsgrad? Tatsächlich habe ich mir diesen Lautsprecher selbst für…
    02.06.2026
  • Wilson Benesch Prime Meridian System

    The first, rather lengthy article about Wilson Benesch' Prime Meridian system dealt solely with the turntable unit, consisting of the OMEGA Drive, ALPHA Drive, the FrACTal damping system in which the motor and tonearm are mounted, and the R1 Rack. Now, in addition to introducing the tonearm and cartridge, we finally turn to the sound of the turntable. The fact that the Prime Meridian system's turntable is driven by a motor with one and a…
    29.05.2026

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.