tests/25-05-12_stenheim
 
Test.
Deutsch English|

Stenheim Alumine FIVE SX

01.08.2025 // Dirk Sommer

In addition to the speakers, the employees of Die Dritte Dimension also brought along two grounding cables, which were used to connect the grounding terminals of the Stenheim speakers in their store to a Shunyata grounding system. However, as these weren’t either long enough to reach my Synergistic Research Active Ground Block SE or did they have the right plugs, I simply connected them to the ground contacts of a Furutech Schuko plug and plugged this into a normal power outlet – with surprisingly great success: the music unfolded against a quieter, “blacker” background, which benefited more than just the fine dynamics. Even the most subtle spatial information became audible, and the imaginary stage seemed larger. I find it particularly positive that this improvement, which is not of an insignificant nature, does not require a special grounding system: two cables with a sufficient cross-section and a good plug are all it takes to achieve a noticeable enhancement. So far, I’ve just really liked the Stenheim speakers, they were fun to listen to. It was only in the course of the following days that I wondered what the reason for this spontaneous feeling of contentment could be. Part of it was certainly due to the dynamic performance – perhaps because of the relatively high efficiency? – but even more so because an acoustic imperfection in my listening room was now only noticeable when I strongly concentrated on it, thanks to the Stenheim speakers. The very steep drop-off around 64 hertz had almost disappeared, whatever the reason for that may be. In any case, the Alumine FIVE seemed to harmonize extremely well with my listening room.

This crossover equipped with air coils and capacitors from Jantzen and Mundorf was photographed in the production facilities in Vétroz and is just one example of a Stenheim filter network. The company owner didn’t want to reveal what they look like in the Alumine Five SX
This crossover equipped with air coils and capacitors from Jantzen and Mundorf was photographed in the production facilities in Vétroz and is just one example of a Stenheim filter network. The company owner didn’t want to reveal what they look like in the Alumine Five SX

Jean-Pascal Panchard shared my opinion exactly the same way after having got his first impression of the system in conjunction with his FIVE SX speakers during his visit. However, he suggested moving the two heavyweights a little further apart and angling them slightly less toward the listening position. I didn't dare moving the speakers closer to the side walls because I was afraid that the first reflections from there would prevent the speakers to disappear completely from the soundstage. But the developer did know his creations better, of course: Experimenting with small lateral adjustments and angling, the Stenheims rewarded with a slightly larger image, even in depth, and a touch less highs with a hint more low-frequency energy. The sound detached itself from the cabinets at least as well as before. Could this be due to the asymmetrical positioning of the tweeter and midrange drivers on the baffle? Jean-Pascal Panchard also encouraged me to experiment a little with room adaptation. When the speakers were delivered, the two jumpers formed a horizontal line, which should correspond to a fairly linear frequency response. After a little trial and error, I decided to add one decibel more bass energy: the sound just got a touch warmer, rounder, and ultimately more appealing.

The threaded bushings for the solid spikes with a diameter of 30 millimeters were inserted into the platform. The spikes can be easily adjusted from above using the tool supplied
The threaded bushings for the solid spikes with a diameter of 30 millimeters were inserted into the platform. The spikes can be easily adjusted from above using the tool supplied

Despite my previous contentment, after Andante Largo owner Suzuki san having paid me a visit, I simply couldn't resist trying out his plates developed for speaker spikes – and, of course, writing about them. In short: the Silent Mounts help the Stenheim speakers achieve a slightly larger and more vivid soundstage. The instruments got a touch sharper in focus, and the inner dynamics and rhythmic accentuation also benefited from the spike inserts. The standard Stenheim plates were clearly inferior to the Silent Mounts in terms of sound, which made me leave the latter under the speakers.


  • Scansonic HD M15.2

    Scansonic HD gehört seit 2013 wie die wohlbekannte dänische Edelschmiede Raidho zur Firmengruppe Dantax. So ist es nicht weiter verwunderlich, dass in die Lautsprecherlinien von Scansonic immer auch die in der Entwicklung der High-End Lautsprecher von Raidho gewonnenen Erkenntnisse einfließen. Der Bändchenhochtöner der M-Serie kommt folglich nicht von ungefähr. Trotzdem spricht Scansonics M-Serie eine eigene, starke und wie ich finde sehr moderne Designsprache. Für eine Serie, bei der eine besonders attraktive Preisgestaltung eine große Rolle…
    15.05.2026
  • Chord Company ChordMusic Kabel

    Ich hatte schon einiges über die Kabel der englischen Chord Company gehört, aber bisher noch nicht das Vergnügen, eines davon in meiner Anlage zu hören. Deshalb war meine Vorfreude ausgesprochen groß, als ich den Auftrag erhielt, XLR-Verbindungen und Lautsprecherkabel der Top-Linie mit dem Namen ChordMusic einem ausführlichen Test zu unterziehen. Die Chord-Produkte werden seit 2017 von DREI H in Deutschland und Österreich vertrieben. Da ich in Hamburg lebe und der Vertrieb ebenfalls in der Hansestadt…
    13.05.2026
  • Wilson Benesch Prime Meridian System – an approximation

    I reviewed Wilson Benesch's first turntable in 1996, and the second two years later. Getting hold of the third for a review shouldn't have been a big deal, I thought. But it was – for several reasons: It's a really big thing, weighing over 350 kilograms, and the accompanying white paper is 138 pages long. The fact that the Prime Meridian system, if I remember correctly, is the most expensive product ever tested by hifistatement.net…
    11.05.2026
  • Harbeth Super HL5plus XD2

    Der HL5 ist das älteste Modell von Harbeth und gehört nach wie vor zum aktuellen Sortiment. Seine Geschichte reicht fast 50 Jahre zurück und begann 1977, als H.D. Harwood, ein ehemaliger BBC-Ingenieur, als Erster Polypropylen für die Membranen der Treiber einsetzte. Übrigens steht „HL“ für die Vornamen von Harwood und seiner Frau Elisabeth. Vom HL5 zum Super HL5plus XD2 Die originalen HL-Monitor-Modelle, vom Mk 1 bis zum Mk 4, wurden zwischen 1977 und 1988 hergestellt.…
    08.05.2026
  • iFi iDSD Phantom

    Der iDSD Phantom vereint Streamer, DAC und Kopfhörerverstärker in bester iFi-Manier zu einem Alleskönner. iFi erreicht damit die höchstmögliche Ausbaustufe von stationärem HiFi. Abgerundet wird das Paket von einem aufwendigen Gehäuse und sowohl einer Transistor- als auch einer Röhren-Ausgangsstufe. Gerade im mobilen Bereich hat iFi in der Vergangenheit viele Geräte entwickelt, die einen Vergleich mit dem berühmten Schweizer Allzwecktaschenmesser nicht im Geringsten scheuen müssen. Mit dem Phantom hält die – nahezu – unbegrenzte Vielfalt an…
    05.05.2026
  • Pro-Ject Flatten it

    Das Thema thermische Behandlung von Festplatten, Kabeln oder Schallplatten wurde in Hifistatement mehrfach ausführlich behandelt. Heute geht es um den Flatten it Schallplatten-Bügler von Pro-Ject, der dank seines attraktiven Preises ein Angebot für jedermann sein könnte. Dirk Sommer hat an dieser Stelle seit Jahren immer wieder über Kältebehandlungen zur Klangverbesserung explizit bei der Firma CoolTech berichtet. Das liest sich überzeugend, ist aber mit ein wenig Aufwand verbunden, der selbst manch eingefleischtem Audio-Freak zu lästig erscheint.…
    28.04.2026

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.