tests/23-08-29_borresen
 
Test.
Deutsch English|

Børresen X3

06.10.2023 // Finn Corvin Gallowsky

The woofers are designed without dust caps
The woofers are designed without dust caps

However, enthusiasm isn’t going to be enough here, the X3s have to be moved into the listening room with full use of physical strength. There, I first position them on my usual speaker places. Due to the elongated design of the speakers, the rear side of the cabinet comes absurdly close to the rear wall. My personal conclusion to be drawn at this point is that this can't work at all. But it does. Of course, the lows are rather salient, but by no means squashy or uncontrolled. Despite their closer proximity to the rear wall, the X3s behave very much like my own speakers. But it’s going to get even more absurd. Along the first test tracks, the soundstage already appears airy and holographic, but the feeling is beginning to grow that the distance between the Børresen speakers should be chosen even larger to make them reach their full potential. Consequently, I push them as far as at all possible to the side walls and thus directly into the corners of my room. And surprisingly, the speakers acknowledge this with an even more open, three-dimensional soundstage. In addition, it is still necessary to experiment further by changing the inward angle of the speakers. A closer look into the instruction manual reveals that the speakers are already positioned according to the manufacturer’s recommendation. The imagined lines originating orthogonally from the baffles should run over the listener's shoulder and meet about one meter behind the head. Only the inner flanks of the speakers should remain visible. After running through a bit of trial and error, I reach the conclusion that in my listening room I prefer a slightly more angled-in version. Therefore, being able to see the first millimeters behind the baffle’s rounded edge, I merely can guess the inner flanks of the speakers. Due to the short listening distance, the speakers still aim at a point behind my ears, but not pointing directly at them. However, their hotspot is now less than a meter away from my head. All in all, the speaker placement is more than unusual. It’s closer to the walls on all sides than I've ever positioned a speaker before, but it doesn't seem to bother the X3s in any way. On the contrary, they seem to feel really comfortable now.

The massive structure of the driver speaks for itself
The massive structure of the driver speaks for itself

Recently I came across the song "Coup D'etat" from Level 42’s album World Machine, leaving the impression as particularly well-produced pop music, while listening to it over an inappropriately used KRK studio monitor during some soldering work. It seems to me to be a suitable opening track for testing the X3. I get started, of course, without any EQ adjustment of the speakers to my room. Before thinking about anything else, I make the observation that the X3s without question offer the highest groove factor of any speakers having visited my listening room to date. They whip out the song with such playfulness, ease and dense energy as if it were a trifle. The various layers of the mix with clearly positioned snare and hi-hat, outward-stretched percussion elements, Mark King's characteristic bass playing and various synths are presented on a wide soundstage in an enormously airy, light-footed manner with a great tensional relationship to each other. Individual sound sources are reproduced with a generous individual expansion, as would be expected from a speaker of this scale. The individual instruments seem somewhat less sharp and selective, but they create an extremely attractive three-dimensionality. Since the instruments close ranks due to their individually greater extension, it stands to reason that the greatest possible distance between the speakers leads to the most convincing result. The musical events seem to rather take place in the listening room than being only reproduced as an image. The depth of the stage is very good, but still quite a significant bit away from the imaginary opening in my room’s rear wall that I sometimes imagine when listening to the Børresen 05 SSE in Dirk Sommer's listening room. Nevertheless I feel directly involved in the musical happening and less like in a concert room as a somewhat distant listener. However, both the size of the listening room and the listening distance have an effect on these impressions, but I think it is more than fair to state that a Børresen 05 produces a more impressive depth of stage than an X3 - apart from the connected audio system, of course.

A simple but perfectly adequate single-wiring terminal has been implemented
A simple but perfectly adequate single-wiring terminal has been implemented


  • iFi iDSD Phantom

    Der iDSD Phantom vereint Streamer, DAC und Kopfhörerverstärker in bester iFi-Manier zu einem Alleskönner. iFi erreicht damit die höchstmögliche Ausbaustufe von stationärem HiFi. Abgerundet wird das Paket von einem aufwendigen Gehäuse und sowohl einer Transistor- als auch einer Röhren-Ausgangsstufe. Gerade im mobilen Bereich hat iFi in der Vergangenheit viele Geräte entwickelt, die einen Vergleich mit dem berühmten Schweizer Allzwecktaschenmesser nicht im Geringsten scheuen müssen. Mit dem Phantom hält die – nahezu – unbegrenzte Vielfalt an…
    05.05.2026
  • Pro-Ject Flatten it

    Das Thema thermische Behandlung von Festplatten, Kabeln oder Schallplatten wurde in Hifistatement mehrfach ausführlich behandelt. Heute geht es um den Flatten it Schallplatten-Bügler von Pro-Ject, der dank seines attraktiven Preises ein Angebot für jedermann sein könnte. Dirk Sommer hat an dieser Stelle seit Jahren immer wieder über Kältebehandlungen zur Klangverbesserung explizit bei der Firma CoolTech berichtet. Das liest sich überzeugend, ist aber mit ein wenig Aufwand verbunden, der selbst manch eingefleischtem Audio-Freak zu lästig erscheint.…
    28.04.2026
  • Sumiko Oriole

    Sumikos Firmensitz befindet sich in Mineapolis, USA im Bundesstaat Minnesota. Von hier aus werden die Tonabnehmer weltweit vertrieben. Hergestellt werden sie allerdings in Japan bei Excel Sound in Yokohama. Dort werden die Systeme seit 1982 von ausgewählten Handwerkern handgefertigt. Das neu auf dem Markt befindliche Oriole aus der Reference-Serie von Sumiko liegt preislich und klanglich in der Mitte zwischen dem Starling und Songbird aus gleichem Hause. Oriole ist übrigens die englische Bezeichnung für den hierzulande…
    24.04.2026
  • WestminsterLab Omne

    Ich schätze WestminsterLab-Komponenten für ihre Musikalität und Authentizität, die den Zugang zur Musik ganz selbstverständlich öffnen. Diese Qualität verspricht nun WestminsterLab in Form des Omne, einem Vollverstärker, der das gesamte Westminster-Lab Erlebnis in einem All-in-One-Paket vereinen soll. Ein Versprechen, das neugierig macht. Als Angus Leung den Omne Vollverstärker Anfang Februar 2025 in Hamburg präsentierte, ging es ihm erkennbar nicht um die übliche Choreografie aus Neuheit und Superlativen. Im Zentrum stand für ihn vielmehr die Antwort…
    21.04.2026
  • SOtM sMS-2000 – ein Nachtrag

    Klanglich, optisch und in Sachen Verarbeitung hat mich der SOtM sMS-2000 rundum begeistert. Im täglichen Betrieb erweist er sich als komfortabel und bisher völlig stabil. Die Einrichtung einer zusätzlichen internen Festplatte hätte allerdings Programmierkenntnisse in Linux erfordert. Ich habe deshalb die zum Lieferumgang gehörende SSD aktiviert. Beim kürzlich erschienenen Test agierte der sMS-2000 ja lediglich als Streaming Bridge. Die Musikdaten bezog er vom Melco N1Z H60/2 über Ethernet, denn die Kombination eines netzwerkgebunden Servers als…
    17.04.2026
  • Soulnote A-2 ver.2

    Ist man, wie ich, seit zwei Jahren zufriedener und stolzer Besitzer eines Soulnote A2 Vollverstärkers, kann man durchaus unruhig werden, wenn da eine Version 2 auf den Markt kommt. Klingt diese nun besser? Sollte ich meinen A2 verkaufen, um den neuen zu erwerben? Lohnt das, und macht der Vorteil auch den Preisunterschied wett? Mein Soulnote A2 stand damals mit rund 7.000 Euro in der Preisliste. Sein Nachfolger A2 ver.2 ist exakt 1500 Euro teurer, also…
    14.04.2026

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.