tests/25-04-30_ideon
 
Test.
Deutsch English|

Ideon Audio 3R USB Renaissance mk2 Black Star, 3R Master Time Black Star, Absolute Time and Absolute Time Signature

13.06.2025 // Roland Dietl

This is completely different when transferring digital music data: The data are transmitted in real time. Errors or losses in signal transmission are not corrected due to the design. The USB interface is prone to noise, time errors, and data loss; all things that are particularly critical when transmitting audio data. In addition, there is the annoying 5-volt power supply cable of the USB standard, which is routed very close to the sensitive data signals, but which cannot be easily dispensed with. None of this is new, so it is all the more surprising that even in the case of investments in higher and highest price regions, little attention is sometimes paid to this problem.

The connection panel of the Absolute Time Signature: USB on the left and S/PDIF in the middle with separate clock output
The connection panel of the Absolute Time Signature: USB on the left and S/PDIF in the middle with separate clock output

And that's where Ideon Audio's re-clockers come in. All four models are designed to compensate for and correct signal degradation on the USB transmission path due to cable loss, poor power supplies and clock errors. The special feature is that it always goes in and out via USB. There is no conversion to another data format, such as S/PDIF or I2S. Ideon addresses the USB vulnerabilities on three levels. The whole thing is then succinctly called 3R and stands for Re-Drive, Re-Clock and Re-Generate.

The inner workings of the Absolute Time Signature: on the left the two toroidal transformers, in the middle rectifier circuit and screening, next to them the linear voltage regulators connected in series, above and far right the two cascaded USB modules and the S/PDIF module (green)
The inner workings of the Absolute Time Signature: on the left the two toroidal transformers, in the middle rectifier circuit and screening, next to them the linear voltage regulators connected in series, above and far right the two cascaded USB modules and the S/PDIF module (green)

The core chip, which is used in all four Re-Clocker models, is an individually configurable hi-speed hub controller of the latest generation. Ideon has developed its own firmware for this chip. According to Ideon, signal amplification and correction are implemented in the chip at both the input and output of the re-clocking process (re-drive). In particular, this is intended to minimize the effects of the subsequent USB connection to the DAC. The chip gets its clock signa from a high-precision clock oscillator. This precisely re-clocks the data stream coming from the source, which is intended to minimize jitter in particular. So that there are no misunderstanding: The clock signals have no relation to the audio sample rate frequencies at this point and are not directly involved in the signal conversion. Rather, the USB data stream is re-clocked, which is supposed to make the work of the connected DAC easier.


  • Muon2 Ethernet Filter

    Netzwerk-Audio hat die HiFi-Welt verändert und zugleich die Bedeutung der Netzwerkinfrastruktur in den Fokus gerückt. Mit dem Muon2 Ethernet Filter stellt Network Acoustics sein neues Referenzmodell vor – eine konsequente Lösung zur Optimierung anspruchsvoller Streaming-Ketten. Wer noch vor einigen Jahren behauptet hat, ein Ethernet-Kabel oder ein Switch im Netzwerkpfad könne den Klang einer HiFi-Anlage beeinflussen, ist vermutlich auf erhebliche Skepsis gestoßen. Schließlich gilt bei der digitalen Übertragung zunächst ein einfaches Prinzip: Die Daten kommen entweder…
    17.11.2026
  • SME Model 35

    Bei einem Treffen mit Mansour Mamaghani Anfang des Jahres in seinem Hamburger Unternehmenssitz kam das Gespräch schnell auf seinen neuesten Coup: Audio Reference hatte 2025 den Vertrieb für die britische Edel-Marke SME übernommen. Ganz klar, dass Hifistatement eins der neuen Modelle testen wollte. Voilà, es ist so weit: Ein SME Model 35 hat auf meinem Copulare-Rack Platz genommen und will zeigen, warum die Marke im Analogbereich ganz oben mitspielt. Schon der erste Eindruck lässt einiges…
    09.11.2026
  • Rega Aos MC

    Rega schließt die Lücke in seinem Portfolio für MC-Phonovorstufen. Die neue Aos positioniert sich zwischen der vergleichsweise einfachen Fono MC und der Referenz-Phonovorstufe Aura MC. Mit von der Aura abgeleiteter Technik und einem Preis von 2000 Euro dürfte sie im interessanten Sweet Spot für die meisten MC-Fans liegen. Schon allein aufgrund ihrer bloßen Abmessungen wickelt mich dieses Gerät sofort um den Finger. Mit der ungefähren Grundfläche eines DIN-A4-Blatts und der schmalen Seite als Front entspricht…
    03.11.2026
  • KLH Audio Model Four

    Endlich steht mal etwas ganz anderes in meinem Hörraum. Der Lautsprecher des traditionsreichen amerikanischen Herstellers KLH entspricht einem Design von vor mehr als 50 Jahren, wie man es auch heutzutage bei Edelmarken wie Harbeth oder Audio Note findet. Bislang hatte ich nicht das Vergnügen, einen solchen Lautsprecher im Hörraum zu erleben. Neben dem Design mit breiter Schallwand und geringer Bautiefe macht der Paarpreis von knapp 2000 Euro die KLH Model Four hochgradig interessant. Auf zum…
    19.10.2026
  • darTZeel Audio CTH-8550 Mk II

    darTZeel ist ein Schweizer Unternehmen, das 2001 in Genf von Hervé Delétraz gegründet wurde. Der Name ist ein Anagramm des Nachnamens Delétraz. Die Arbeit an den ersten Geräten begann bereits 1984 im Rahmen einer Diplomarbeit, und nach 18 Jahren Forschung wurde 2002 der Leistungsverstärker NHB-108 offiziell vorgestellt. Es gibt Marken, auf die man viele Jahre warten muss, aber man wartet trotzdem weiter. So war es für mich bei der Marke darTZeel. Zufällig traf ich ihren…
    13.10.2026
  • IsoAcoustics GAIA Neo I

    Erinnern Sie sich noch? Es ist bereits eine ganze Weile her, da haben Hifi-Fans ihre Lautsprecher auf Tennisbälle gestellt, um einen besseren Klang aus ihnen herauszukitzeln. Oder sie haben abenteuerliche Selfmade-Konstruktionen gebastelt, auf denen die vielleicht nicht ganz highendigen Schallwandler platziert wurden. Das ist lange her und in der Zwischenzeit hat sich in Sachen Lautsprecher-Füße einiges getan. Es gibt eine große Zahl an Herstellern, die Basen, Spikes oder Ständer mit unterschiedlichen Konzepten und Materialien produzieren,…
    09.10.2026