tests/22-03-08_raidho
 
Test.
Deutsch English|

Raidho TD1.2

15.09.2022 // Roland Dietl

The TD1.2 as viewed from above/behind
The TD1.2 as viewed from above/behind

Meanwile the 250 hours of burning-in time are over and a new listening round is due. The bass reproduction of the TD1.2 is now more precise and the upper frequency ranges have opened up considerably. What remains is a somewhat constricted sound character and a spatiality that is simply not accurate enough for me. Moreover, the integration of low-mid and high frequencies could also be more homogeneous. Therefore, I would like to give the TD1.2 another 200 hours of play-in time.

In the meantime, let's take a look at the accompanying stands. The stands are a clever design in terms of aesthetics and the materials chosen, and they are as light as they look. The idea behind this is that the stand should store as little energy as possible. The vibration decoupling is done on two levels with movable isolation elements, each with some play. The loudspeaker doesn't sit directly on the top plate, but is decoupled from the stand by small discs mounted on metal balls. The stand itself is decoupled from the floor by four feet in a ball and socket arrangement. The whole stand, however, is less rigid than one would normally expect and reminds me of a leaf spring. This impression is reinforced by the heavy weight of the speakers, which cause the stands to oscillate at the lightest touch. Another aspect is the height of the stands, which at 78 centimetres makes the speakers stand unusually high visually. However, a cross-check of the Børresen Acoustics 05 Silver Supreme Edition standing in Dirk Sommer's listening room reveals pretty much the same distance between the bottom edge of the ribbon tweeter and the floor.

The connection terminal of the TD1.2 accepts banana plugs and spades
The connection terminal of the TD1.2 accepts banana plugs and spades

Now that I have gained the impression that the TD1.2 are getting better and better from day to day, the time seems right to take a closer look at the placement of the TD1.2. In my listening room, a large base width of more than three metres proves to be the ideal approach. That's more than is usually the case for me, but this way the TD1.2 requires to be angled in a lot. A little patience is needed to find the right balance between base width and angle. But then the sound really locks into place and we are rewarded with an exceptionally wide sound stage without the much-feared hole in the middle. The next step is to find the right inclination of the baffle, which also requires our attention due to the ribbon's dispersion behaviour. Depending on whether our listening position is rather high or low, the speakers may need to be tilted more forward or backward. This becomes audible when the highs are either lacking a little energy or, conversely, when they get too intense. If you are sitting in a low position, try raising the speaker slightly at the rear - if you are sitting high, adjust the inclination more towards the back. Furthermore, the correct tilt angle also influences the accuracy of the sonic image.


  • Muon2 Ethernet Filter

    Netzwerk-Audio hat die HiFi-Welt verändert und zugleich die Bedeutung der Netzwerkinfrastruktur in den Fokus gerückt. Mit dem Muon2 Ethernet Filter stellt Network Acoustics sein neues Referenzmodell vor – eine konsequente Lösung zur Optimierung anspruchsvoller Streaming-Ketten. Wer noch vor einigen Jahren behauptet hat, ein Ethernet-Kabel oder ein Switch im Netzwerkpfad könne den Klang einer HiFi-Anlage beeinflussen, ist vermutlich auf erhebliche Skepsis gestoßen. Schließlich gilt bei der digitalen Übertragung zunächst ein einfaches Prinzip: Die Daten kommen entweder…
    17.11.2026
  • SME Model 35

    Bei einem Treffen mit Mansour Mamaghani Anfang des Jahres in seinem Hamburger Unternehmenssitz kam das Gespräch schnell auf seinen neuesten Coup: Audio Reference hatte 2025 den Vertrieb für die britische Edel-Marke SME übernommen. Ganz klar, dass Hifistatement eins der neuen Modelle testen wollte. Voilà, es ist so weit: Ein SME Model 35 hat auf meinem Copulare-Rack Platz genommen und will zeigen, warum die Marke im Analogbereich ganz oben mitspielt. Schon der erste Eindruck lässt einiges…
    09.11.2026
  • Rega Aos MC

    Rega schließt die Lücke in seinem Portfolio für MC-Phonovorstufen. Die neue Aos positioniert sich zwischen der vergleichsweise einfachen Fono MC und der Referenz-Phonovorstufe Aura MC. Mit von der Aura abgeleiteter Technik und einem Preis von 2000 Euro dürfte sie im interessanten Sweet Spot für die meisten MC-Fans liegen. Schon allein aufgrund ihrer bloßen Abmessungen wickelt mich dieses Gerät sofort um den Finger. Mit der ungefähren Grundfläche eines DIN-A4-Blatts und der schmalen Seite als Front entspricht…
    03.11.2026
  • KLH Audio Model Four

    Endlich steht mal etwas ganz anderes in meinem Hörraum. Der Lautsprecher des traditionsreichen amerikanischen Herstellers KLH entspricht einem Design von vor mehr als 50 Jahren, wie man es auch heutzutage bei Edelmarken wie Harbeth oder Audio Note findet. Bislang hatte ich nicht das Vergnügen, einen solchen Lautsprecher im Hörraum zu erleben. Neben dem Design mit breiter Schallwand und geringer Bautiefe macht der Paarpreis von knapp 2000 Euro die KLH Model Four hochgradig interessant. Auf zum…
    19.10.2026
  • darTZeel Audio CTH-8550 Mk II

    darTZeel ist ein Schweizer Unternehmen, das 2001 in Genf von Hervé Delétraz gegründet wurde. Der Name ist ein Anagramm des Nachnamens Delétraz. Die Arbeit an den ersten Geräten begann bereits 1984 im Rahmen einer Diplomarbeit, und nach 18 Jahren Forschung wurde 2002 der Leistungsverstärker NHB-108 offiziell vorgestellt. Es gibt Marken, auf die man viele Jahre warten muss, aber man wartet trotzdem weiter. So war es für mich bei der Marke darTZeel. Zufällig traf ich ihren…
    13.10.2026
  • IsoAcoustics GAIA Neo I

    Erinnern Sie sich noch? Es ist bereits eine ganze Weile her, da haben Hifi-Fans ihre Lautsprecher auf Tennisbälle gestellt, um einen besseren Klang aus ihnen herauszukitzeln. Oder sie haben abenteuerliche Selfmade-Konstruktionen gebastelt, auf denen die vielleicht nicht ganz highendigen Schallwandler platziert wurden. Das ist lange her und in der Zwischenzeit hat sich in Sachen Lautsprecher-Füße einiges getan. Es gibt eine große Zahl an Herstellern, die Basen, Spikes oder Ständer mit unterschiedlichen Konzepten und Materialien produzieren,…
    09.10.2026