tests/22-03-08_raidho
 
Test.
Deutsch English|

Raidho TD1.2

15.09.2022 // Roland Dietl

An alternative to this concept is to dispense with a fully conductive membrane and instead use a wafer-thin plastic film to which conductor tracks are applied. With this technique - which Raidho is also using - it is easier to realise an impedance in the normal range between 4 and 8 ohms, as longer and thinner conductor tracks are possible here, running meander-like across the diaphragm. Speakers that make use of this concept are also called "semi" ribbons or magnetostats. The foil used by Raidho is said to be record-breakingly light at only 20 milligrams and a full 11 microns thick. The version of the "ribbon" used in the TD1.2 has also been given a particularly powerful motor that increases sensitivity by three decibels compared to the previous model. The acoustically optimised chamber behind the foil should lead to a further reduction of distortion by 35 decibels compared to the already extremely low values of the previously employed version.

The ribbon up close
The ribbon up close

Almost more complex than the construction of the ribbon is the manufacturing of the midwoofer with its diameter of 11.5 centimetres. Right from the beginning, Raidho has relied on composite materials for the diaphragm technology. The advantages lie the individual balance between high torsional stiffness on the one hand and high inward damping on the other. With the technology used in the TD1.2, the effort was taken to the absolute extreme. An aluminum cone with a ceramic coating forms the basis of the diaphragm. Added to this are layers of tantalum, which is extremely hard and stiff, and - yes, you read that correctly - diamond. Raidho specifies 10 micrometres or 1.5 carats of diamond on each membrane. The tantalum/diamond layers are said to reduce resonance by 36 decibels compared to ceramic and to be 50 times stiffer than a pure ceramic diaphragm. At the same time, this is said to have raised the resonance frequency to 20 kilohertz. The result of this enormous outlay is said to be a perfect transient response without measurable distortion. The motor is based on neodymium ring magnets with optimised magnetic field characteristics, which, in interaction with the underhung titanium voice coil wound in flat wire, ensure that an extremely strong magnetic field is created inside the driver. This should lead to a drastic increase in dynamic performance. However, the effort expended doesn't stop with the drivers. The crossover of the TD1.2 was completely redesigned, with the focus on a correct phase response at all frequencies and an optimal impulse behaviour. Only a few, but very high-quality components from Mundorf are used here. The wiring is point-to-point, waiving therefore the customary circuit board.

The midwoofer showing its cone made of an aluminium/ceramic/ tantalum/diamond sandwich construction
The midwoofer showing its cone made of an aluminium/ceramic/ tantalum/diamond sandwich construction

Each driver is mounted in its own solid aluminum frame, which is fixed to the baffle with four screws each. The frames are rounded to avoid diffraction effects at the front of the speaker. The lower baffle section is slightly tilted to optimise phase response. The curved cabinet, optimised for low resonance, tapers slightly towards the rear and is reinforced by a thick aluminium backbone accommodating for the bass reflex ports. The optimised crossover and the new driver design afore described should lead to a considerable improvement in efficiency - not exactly one of the strengths of Raidho speakers up to this day. In operation, I got by with the modest output of my Omtec CA 25 without any problems.


  • Muon2 Ethernet Filter

    Netzwerk-Audio hat die HiFi-Welt verändert und zugleich die Bedeutung der Netzwerkinfrastruktur in den Fokus gerückt. Mit dem Muon2 Ethernet Filter stellt Network Acoustics sein neues Referenzmodell vor – eine konsequente Lösung zur Optimierung anspruchsvoller Streaming-Ketten. Wer noch vor einigen Jahren behauptet hat, ein Ethernet-Kabel oder ein Switch im Netzwerkpfad könne den Klang einer HiFi-Anlage beeinflussen, ist vermutlich auf erhebliche Skepsis gestoßen. Schließlich gilt bei der digitalen Übertragung zunächst ein einfaches Prinzip: Die Daten kommen entweder…
    17.11.2026
  • SME Model 35

    Bei einem Treffen mit Mansour Mamaghani Anfang des Jahres in seinem Hamburger Unternehmenssitz kam das Gespräch schnell auf seinen neuesten Coup: Audio Reference hatte 2025 den Vertrieb für die britische Edel-Marke SME übernommen. Ganz klar, dass Hifistatement eins der neuen Modelle testen wollte. Voilà, es ist so weit: Ein SME Model 35 hat auf meinem Copulare-Rack Platz genommen und will zeigen, warum die Marke im Analogbereich ganz oben mitspielt. Schon der erste Eindruck lässt einiges…
    09.11.2026
  • Rega Aos MC

    Rega schließt die Lücke in seinem Portfolio für MC-Phonovorstufen. Die neue Aos positioniert sich zwischen der vergleichsweise einfachen Fono MC und der Referenz-Phonovorstufe Aura MC. Mit von der Aura abgeleiteter Technik und einem Preis von 2000 Euro dürfte sie im interessanten Sweet Spot für die meisten MC-Fans liegen. Schon allein aufgrund ihrer bloßen Abmessungen wickelt mich dieses Gerät sofort um den Finger. Mit der ungefähren Grundfläche eines DIN-A4-Blatts und der schmalen Seite als Front entspricht…
    03.11.2026
  • KLH Audio Model Four

    Endlich steht mal etwas ganz anderes in meinem Hörraum. Der Lautsprecher des traditionsreichen amerikanischen Herstellers KLH entspricht einem Design von vor mehr als 50 Jahren, wie man es auch heutzutage bei Edelmarken wie Harbeth oder Audio Note findet. Bislang hatte ich nicht das Vergnügen, einen solchen Lautsprecher im Hörraum zu erleben. Neben dem Design mit breiter Schallwand und geringer Bautiefe macht der Paarpreis von knapp 2000 Euro die KLH Model Four hochgradig interessant. Auf zum…
    19.10.2026
  • darTZeel Audio CTH-8550 Mk II

    darTZeel ist ein Schweizer Unternehmen, das 2001 in Genf von Hervé Delétraz gegründet wurde. Der Name ist ein Anagramm des Nachnamens Delétraz. Die Arbeit an den ersten Geräten begann bereits 1984 im Rahmen einer Diplomarbeit, und nach 18 Jahren Forschung wurde 2002 der Leistungsverstärker NHB-108 offiziell vorgestellt. Es gibt Marken, auf die man viele Jahre warten muss, aber man wartet trotzdem weiter. So war es für mich bei der Marke darTZeel. Zufällig traf ich ihren…
    13.10.2026
  • IsoAcoustics GAIA Neo I

    Erinnern Sie sich noch? Es ist bereits eine ganze Weile her, da haben Hifi-Fans ihre Lautsprecher auf Tennisbälle gestellt, um einen besseren Klang aus ihnen herauszukitzeln. Oder sie haben abenteuerliche Selfmade-Konstruktionen gebastelt, auf denen die vielleicht nicht ganz highendigen Schallwandler platziert wurden. Das ist lange her und in der Zwischenzeit hat sich in Sachen Lautsprecher-Füße einiges getan. Es gibt eine große Zahl an Herstellern, die Basen, Spikes oder Ständer mit unterschiedlichen Konzepten und Materialien produzieren,…
    09.10.2026