tests/20-11-03_transrotor
 
Test.
Deutsch English|

Transrotor TRA 9

18.11.2020 // Dirk Sommer

But let's get back to our topic: With the tonearm tube, a resonance-free characteristic is of decisive importance. For this reason, the designing triumvirate decided on a two-part solution with a tapered tube that is connected to the bearing block. Their initial plan envisaged inserting into this conical tube a second, bought-in tube, which should have the headshell attached to its other end. With a large overlap, they were supposed to dampen each other. However, no standard tube with the extremely tight tolerances required for this application was available on the market. Therefore, the front tube is as well machined from solid material and then drilled. But it’s not only the different dimensions of the two tubes that lead to a resonance minimization. The experience gained in the construction of turntables allowed for a combination of different aluminum alloys in such a way that they provide optimum damping. But a tonearm isn’t just about controlling vibration, but also about their fastest possible dissipation. As a result, the idea of gluing the two tubes together was rejected. Thanks to the very small tolerances, both tubes touch each other over a large area and merely need to be fixed with three screws.

The anti-scating force is generated magnetically and adjusted by this screw. When aligning it with the red ring, it should correlate with a tracking force of 1.75 grams
The anti-scating force is generated magnetically and adjusted by this screw. When aligning it with the red ring, it should correlate with a tracking force of 1.75 grams

The bearing block is quite solidly built and completely flat on top. To check the horizontal alignment of the arm, a spirit level, which should be part of the accessories package soon, can be placed on it during the adjustment process. The arm that arrived in Gröbenzell is a serial model, but the manual, the packaging and the accessories do not fully correspond to the future scope of delivery. When considering a particularly clever detail this is a real pity. Although a simple template for adjusting the overhang is included with the arm, I rather prefer to use my proven Dennesen adjustment protractor. It has a tip that has to be exactly aligned with the tonearm pivot point, which greatly simplifies the correct installation of tonearms that show a small recess here. However, a small hole within the top-surface of the bearing block did not seem elegant enough to Jochen Räke, so a plastic 3D-printed detachable bridge will soon mark this point. That’s a great idea.

The headshell can be rotated for azimuth adjustment. However, this requires an extraordinary amount of dexterity
The headshell can be rotated for azimuth adjustment. However, this requires an extraordinary amount of dexterity

More important than such details, which are primarily important for those analogue aficionados who change cartridges frequently, is, obviously, what type of bearing the block encloses. The studies began with metal ball bearings from SKF, as Jochen Räke discloses. They certainly are of good quality, but like those of the competitors, they are mainly designed for high speed and load. Since these bearings are supposed to considerably heat up at high speeds, they must have a correspondingly large amount of play - and this isn't exactly what is paramount for a tonearm. Here, extremely low break-away forces and very little play are of crucial importance. So Japanese steel bearings are now used for horizontal bearing, while the arm is guided by ceramic bearings vertically. To get the bearings free of play, they are clamped against each other. However, the standard nuts intended for this application would not position themselves at an exact 90-degree angle on the axle, which subsequently would subject the bearings to uneven forces, Jochen Räke annotates. Therefore, special nuts are machined for this application that really form a 90-degree angle with the axle. Locking this with a second nut, however, would change the previously meticulously set tension. Thus, it was decided to secure the special nuts after having been tightened to the required compression with sealing wax instead of using another nut. It seems to me that almost no detail of Transrotor's first tonearm went unnoticed.


  • Moonriver Audio Model 505 Hybrid Stereo Phono EQ Stage

    Der Phono-Entzerrer Model 505 des schwedischen Herstellers Moonriver Audio kommt in schlichtem Design daher und wendet sich an den ernsthaften Vinyl-Liebhaber, der ohne Bling Bling einfach Musik hören will. Hinter dieser heuer selten gewordenen Gerätephilosophie verbergen sich oft große HiFi-Perlen, mein Interesse ist geweckt! Im Nachhinein, jetzt, wo dieser Testbericht fertig geschrieben und hier veröffentlicht ist, empfinde ich es als persönlichen Fauxpas, bisher noch nichts von diesen Schweden gehört zu haben. Moonriver Audio meine ich,…
    26.03.2024
  • MUTEC REF10 NANO

    Das Thema Master Clock beschäftigt mich schon längere Zeit. Es ist faszinierend, was sich damit in einer digitalen Kette an klanglicher Verbesserung noch herauskitzeln lässt. Der brandneue REF10 NANO von MUTEC ist eine auf das Wesentliche konzentrierte Variante des überragenden REF10 zum halben Preis. Das ist mal eine Ansage und macht das Thema Clocking noch interessanter als es ohnehin schon ist. Ich habe seit vielen Jahren zwei kaskadierte Mutec MC3+ USB Reclocker in meinem Bestand…
    19.03.2024
  • Chord Electronics Ultima Integrated

    Vor fünf Jahren begann Chord Electronics, mit den Ultima Vorverstärkern und Mono- sowie Stereo-Endstufen eine neue Top-Linie zu etablieren. Jetzt haben die Briten einen Ultima Vollverstärker hinzugefügt, um den hohen Qualitätsstandard auch den Freunden kompakterer Audio-Ketten zugänglich zu machen. Nur zur Erinnerung: John Franks baute ursprünglich hochwertige Elektronik für die Luftfahrt, insbesondere eine zuverlässige Stromversorgung für Kampfflugzeuge. Er gründete 1989, seiner Leidenschaft folgend, das Unternehmen Chord Electronics Ltd. zur Fertigung von High-End-Elektronik. Diese Audio-Karriere begann…
    12.03.2024
  • Dan Clark Audio E3

    Dan Clark Audio schickt sich an, mit seinem geschlossenen Kopfhörer E3 einen neuen Standard in seiner Preisklasse zu setzen zu. Amerikaner sind selten um markige Worte verlegen, da machen auch die Spezialisten aus San Diego keine Ausnahme. Unser Interesse war aufgrund der spannenden Technik geweckt und ein Test ein Muss. Wenn ich Hintergrundinformationen über einen mir persönlich bislang eher unbekannten HiFi-Hersteller sammeln möchte, gehe ich üblicherweise auf dessen Originalwebseite anstatt auf die des deutschen Vertriebs.…
    07.03.2024
  • Aavik C-880 und P-880 – Teil 3

    Ich gebe gern zu, dass einige Passagen zur Technik im ersten Teils des Interviews keine leichte Kost waren. Natürlich geht es auch hier um einige von Michael Børresens konstruktive Lösungen, aber auch um die kommende Generation von Hifi-Fans und – wie angekündigt – um einen Geheimdienst, Kirchen, einen Filou und nukleares Material. Dirk Sommer: Wie hoch ist der Dämpfungsfaktor der P-880? Michael Børresen: Hoch, weil wir so viel Verstärkung haben und acht Ausgangstransistoren. Das kann…
    01.03.2024
  • PrimeCore Audio A7

    Streamen oder nicht streamen, ist das hier die Frage? Eigentlich nicht so richtig, denn mit dem PrimeCore A7 hat niemand eine Ausrede mehr, nicht zu streamen. Bei der Beschäftigung mit diesem spannenden Audio-Server für Roon von Wolfgang Saul ging es um viel mehr als das: Ich habe mein Audionetzwerk neu kennengelernt. Der als Audiosaul bekannte Händler Wolfgang Saul hat sich der möglichst perfekten digitalen Musikwiedergabe verschrieben und möchte diese so zugänglich und damit fair bepreist…
    27.02.2024

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.